UEi Test Instruments

UEi Test Instruments

No image available.
  • 8030 SW Nimbus Ave.
  • Beaverton, OR 97008
  • USA
  • Phone: 503-644-8723
  • Toll Free:
  • Fax: 503-643-6322
  • Website: http://www.ueitest.com

Want to know more about UEi Test Instruments Get Info Now

Expand for more details on this Company

ADM5201 multimeter

Product From UEi Test Instruments

UEi's ADM5201 multimeter combines all the features of a full function multimeter and integrates the functions of an oxygen sensor tester, PFI and TBI Fuel Injection testers. The ADM5201 provides a quick and accurate diagnosis of the complete HO2S circuit. It can also send a rich/lean signal to the ECM, and displaying crossing-per-second (CC) and HO2S voltage simultaneously, when secondary display shows test results. The multimeter function provides efficient trouble shooting and includes a bright LED backlight, battery access door, high impact over-molded case to absorb shock and closed case calibration that allows adjustments to be made directly through the Optically-Isolated RS232 serial port.

Get Info Now

Agent1 RLD15 refrigerant detector

Product From UEi Test Instruments

The UEi Agent1 RLD15 refrigerant detector's digital leak-size indicator provides information beyond simple detection to include approximate leak size. The Agent1 uses a heated sensor to generate an electrical signal in the presence of the target gas. The Agent1's sensor provides approximately 300 hours of service life, and also activates a visual flashing LED when refrigerants are detected. With three sensitivity levels -- high, norm and low -- the Agent1 can either complete quick passes or precision pinpointing to troubleshoot detection.

Get Info Now

GreenThing Fuel Efficiency Analyzer

Product From UEi Test Instruments

UEI's GreenThing Fuel Efficiency Analyzer measures and displays all five gases independently, as well as air/fuel ratio and lambda. With internal memory to retain 255 test results, optional computer software will enable graphing of gases to help isolate problems. The device also works with diesel engines.

Get Info Now

ADL7100 DSO/Ignition Scope

Product From UEi Test Instruments

UEi offers their ADL7100 DSO/Ignition Scope for testing faster operating circuits, like secondary ignition. In this instance, the secondary ignition event represents two gaps being jumped (the cap/rotor gap and the spark plug gap) in about 20 millionths of a second, and when an ignition wire is not properly seated, a third gap adding only 2 or 3 of activity is also present. To this end, UEi feels their scope's separate processors on each channel, higher resolution display, and faster sampling rate allow the user to better identify these small gaps that occur in the firing line of the ignition system.

Get Info Now