Steck Manufacturing

Steck Manufacturing

steckmanufacturing_10095323.png

Steck Manufacturing manufactures body shop specialty repair tools and specialty tools and The BigEasy Lockout tool kit which unlock cars without damaging the car door. Visit our website at www.steckmfg.com to view our product offerings or call 1-800-227-8325 for a catalog.

  • 1115 S Broadway St.
  • Dayton, OH 45408
  • USA
  • Phone: 937-222-0062
  • Toll Free: 800-227-8325
  • Fax: 937-222-6666
  • Website: http://www.steckmfg.com

Want to know more about Steck Manufacturing Get Info Now

Expand for more details on this Company

Super Easy Wedge, No. 32923

Product From Steck Manufacturing

The Steck Super Easy Wedge, No. 32923, is a larger version of the Easy Wedge to be used as an accessory with Steck's BigEasy Lockout kits. The Super Easy Wedge inserts to create a controlled opening of the vehicle door. The bigger wedge can provide more power as well as a bigger opening to be able to maneuver the BigEasy lockout tool. The Super Easy Wedge is a 7" by 9” inflatable wedge made from ballistic nylon to prevent slippage in extreme weather. The Super Easy Wedge has a contact area of 2-1/2" by 4-1/2" giving the wedge 168.75 pounds of force and it is made in the U.S.A.

Get Info Now

I-Bolt universal tow eye with safety strap, No. 71490

Product From Steck Manufacturing

The Steck I-Bolt universal tow eye with safety strap, No. 71490, gives users the ability to safely load disabled foreign and some domestic vehicles on roll back wreckers and frame racks, without causing damage.

Get Info Now

Flange Lever, No. 20037

Product From Steck Manufacturing

Steck Manufacturing's Flange Lever, No. 20037, quickly accesses hard-to-reach damaged frame flanges, door and hood edges and radiator supports to bring back to proper edge alignment. Double-ended reverse 1/4" hook design is made from hardened alloy steel. The flat hook allows for easy manual alignment; the 35-degree angle bar allows access areas like radiator supports.

Get Info Now

Work Stand Wheeler

Product From Steck Manufacturing

The Steck Manufacturing Work Stand Wheeler is a wheeled platform accessory for existing work stands, allowing technicians to easily move loaded work stands from repair to paint prep and paint booths. The Work Stand Wheeler’s 1-1/2'" wide by 36" long steel channel holds either round or square tube stand (X frame) work stands in seconds. This self up-righting channel allows the technician to either push or pull the loaded work stand. The Work Stand Wheeler can accommodate up to a 32" wide extended work stand and easily holds up to 500 lbs of components. 

Get Info Now

Air Tool Oiler Dispenser No. 16600

Product From Steck Manufacturing

Steck introduces the Air Tool Oiler Dispenser, No. 16600. This unique self centering, non-drip oil dispenser head design allows the technician to easily push the air tool inlet under the dispenser head to oil the air tool or other item, such as bolt threads, in one easy motion. Made from Acetal, the Air Tool Oiler Dispenser mounting bracket, with its double face tape, can be adjusted for right-handed, left-handed or center mounting positions on a toolbox or wall. 

Get Info Now

Mig Torch Holder

Product From Steck Manufacturing

The Mig Torch Holder, from Steck Manufacturing, attaches directly to the car so the torch head can be held close to the welding activity, eliminating the need to continually lay hot welding torch heads on the floor and pick them back up. Constructed of polypropylene with two prong metal 26mm rods to hold the hot torch head safely out of the way, th Mig Torch Holder also has spring-mounted floating magnets which allow it to adjust to the contour of the body panel. Designed to work with all common Mig, Tig and Plasma torch heads. 

Get Info Now

Disc Smasher, No. 35270

Product From Steck Manufacturing

Steck Manufacturing's Disc Smasher, No. 35270, ensures quality grinding discs are available and reduces excessive curling of discs. Grinding discs are pressed down by the reinforced nylon Disc Smasher with its ratcheting handle. The base and 8"-long metal center post can hold up to 25 5", 7" or 10" grinding discs. Capture-and-store design presses the disc to conform to the base. Existing warped or curled discs can be restored in a week. The base can be wall- or bench-mounted.

Get Info Now

Axle Popper, No. 71410

Product From Steck Manufacturing

Steck Manufacturing's Axle Popper, No. 71410, breaks loose half shafts from transaxles on front-wheel-drive cars. Safer than using a pry bar, the Axle Popper’s wedge forked end applies even pressure to both sides of the shaft for sure release. The tapered ends of the fork allow the technician to strike the Axle Popper Wedge or use it as a pry bar to release the half shaft. Shim included to fill the gap between the half shaft and the transaxle on some vehicles.

Get Info Now

Disc Smasher

Product From Steck Manufacturing

Steck Manufacturing Company's Disc Smasher will ensure quality grinding discs are available and maximize the shops investment in material costs for these discs by reducing excessive curling and limiting disposal or returns of discs. Grinding discs are held down under pressure from our reinforced Nylon Disc Smasher with its easy ratcheting handle. One squeeze of the release lever while grasping the handle will release the internal metal ratchet mechanism and allow the technician to remove the Disc Smasher to gain easy access to the grinding discs. Disc Smasher’s unique capture and store design forms the disc to conform to the base for any of the three disc sizes ensuring safe, flat vibration free grinding. Existing warped or curled discs can be restored back to proper shape after a week of direct pressure from the Disc Smasher. 

Get Info Now

Disc Smasher, No. 35270

Product From Steck Manufacturing

Steck's Disc Smasher, No. 35270, has a nylon base with an 8”-long metal center post and can hold up to 25 5”, 7” or 10” grinding discs. One squeeze of the release lever while grasping the handle will release the internal metal ratchet mechanism. Warped or curled discs can be restored back to proper shape after a week of direct pressure from the Disc Smasher.

Get Info Now