Ken-Tool

Ken-Tool

kt-blue-logo-tag_10896222.png

Ken-Tool is the world's leading manufacturer of professional tire service hand tools. Headquartered in Akron, Ohio, Ken-Tool has been providing the tire industry and automotive aftermarket with quality products for over 90 years. 

  • 768 E. North St.
  • Akron, OH 44305
  • USA
  • Phone: 330-535-7177
  • Toll Free: 888-536-8665
  • Fax: 800-872-4929
  • Website: http://www.kentool.com

Want to know more about Ken-Tool Get Info Now

Expand for more details on this Company

Professional Super Single Axle Drain Pan No. 30600

Product From Ken-Tool

The Ken-Tool 30600 Professional Super Single Axle Drain Pan solves a problem of gear oil and grease drips and leaks on wheels and tires, and shop floors when servicing the drive and non-driven axles on trucks and trailers.

Get Info Now

5-bar Super Magnum Tire Cage, No. 36010

Product From Ken-Tool

Ken-Tool's 5-bar Super Magnum Tire Cage, No. 36010, reduces the side-force energy resulting from a catastrophic sidewall zipper rupture of a Super Wide-Base tire by 93 percent. The reduction of side-force energy can be achieved thanks to expanded steel mesh deflection barriers welded to the insides of the cage tubing. The cage features a five mandrel-bent, high-strength 12-gauge, 2-1/4" diameter structural steel tubes, welded to a 3/16" thick steel plate base with a 2.0" wide, 1/4" thick reinforcing strap welded to the tubes.   The tire cage comes 48" long, 30" wide and 56-1/4" tall. Made in the U.S.A.

Get Info Now

Industrial Wheel Lock Ring Tool Set, No. 32129

Product From Ken-Tool

The American-made Industrial Wheel Lock Ring Tool Set, No. 32129, from Ken-Tool helps tire technicians safely and quickly remove and replace split lock rings on multi-piece industrial forklift wheels. The tool set helps prevent injury by keeping the technicians' hands safe from harm and outside the tire press cage at all times. The kit comes with two tools: The Demount Prep Tool can be inserted between ends of the split lock ring and the solid flange ring. The Demount End of the tool lifts and fully demounts the split lock ring and the Mounting End sets the split lock ring in place.

Get Info Now

2 to 7-bar tire inflation restraining devices

Product From Ken-Tool

Ken-Tool's 2 to 7-bar tire inflation restraining devices come tested and certified to address higher, 130-psi inflation pressure levels. This tire cage is the first in the industry to be certified for this use, according to the company. It can be used with 455/55R22.5 load range M truck tires. The Occupational Safety and Health Administration’s O.S.H.A. Standard No. 29 CFR Part 1910.177 requires that inflation restraining devices contain 150 percent of a tire's rated inflation pressure during a failure. This tire cage was successfully tested using a truck tire on a multi-piece wheel at 195-psi. 

Get Info Now

T131 Utility Tire Pneumatic Bead Expander, No. 31431

Product From Ken-Tool

Ken-Tool's T131 Utility Tire Pneumatic Bead Expander, No. 31431, makes it easier for 10" to 22" diameter utility tires to seat on the rim. The tool weighs only 2 lbs and uses an internal heavy duty neoprene rubber tube featuring an internal over-pressure relief valve that protects the expander from accidental over inflation. It also features an external pressure quick release valve and is covered by a tough, abrasion-resistant nylon sock. Resistant to oil, grease, solvents, acids and many other chemicals found in tire and tractor shops. Designed for shop air pressures up to 150 psi.

Get Info Now

T45AS super duty tubeless truck tire iron, No. 34649

Product From Ken-Tool

Ken-Tool's T45AS super duty tubeless truck tire iron, No. 34649, has proprietary heat treated ends delivering a slip-free grip on the rim and bead to facilitate mounting and demounting tires. The tip ends insert easily, and prevent the cutting or ripping of the bead or the sidewall. On the mount end, the unique, trademarked curve design always grabs the bead edge. On the demount end, the angled tip easily slips between bead and rim and will not slip when demounting the second bead. Utilizes a 7/8" shaft and 52" length that provides the technician with up to 40 percent greater leverage than previous models.

Get Info Now

7-Piece Thin-Wall Impact Socket Set

Product From Ken-Tool

Ken-Tool's 7-Piece Thin-Wall Impact Socket Set can be used on delicate car and light truck wheels with minimal lug nut clearance. The set comes with seven 6-point sockets, color coded by size, and sheathed in a plastic sleeve which further protects wheel surfaces from damage. There are four standard socket sizes and three metric sizes, all with a 2-Year Limited Lifetime Warranty. The compact case provides convenient storage.

Get Info Now

4-Piece H.D. Wheel Stud Remover Set

Product From Ken-Tool

The Ken-Tool 4-Piece H.D. Wheel Stud Remover Set feature internal tapered reverse threads that lock onto damaged studs or nuts, so technicians can remove them with an impact wrench. The 5/8" and 3/4" wheel stud removers are 3/4" hex drive. The left-hand and right-hand Budd Nut Removers are 1-1/8" hex drive. The set comes conveniently packaged in a compact storage case — and with a limited lifetime warranty.

Get Info Now

4-Piece Lug Nut Remover Impact Socket Set

Product From Ken-Tool

The Ken-Tool 4-Piece Lug Nut Remover Impact Socket Set has internal tapered reverse threads that lock onto damaged nuts or wheel locks and easily tap the power of an impact wrench to pull them off. Packaged in a convenient compact storage case, the set includes four sockets: 3/4", 13/16', 1" and 1-1/8" — all with a 1/2" drive. The set comes with a limited lifetime warranty.

Get Info Now

Dual wheel separator

Product From Ken-Tool

The Ken-Tool dual wheel separator helps remove stuck or frozen dual steel wheels more quickly. This tool can be used on nearly any dual steel wheel truck, bus or van, according to the manufacturer. The separator slips between the frozen wheels and uses the power of a screw-driven pusher to force them apart. Techs can drive it with an impact wrench. Heat-treated for long-lasting strength and durability and made in the U.S.A., the forcing screw, pushers and pullers have large 1-1/8” diameter  by 11 threads intended for years of reliable service.

Get Info Now