» Get Info Now Request more information from manufacturer

Hunter Engineering Company

Company Profile | Request more information

Hunter Engineering Company Company Profile | Request More Information

Hunter Engineering Company is a leading manufacturer of automotive service equipment. Headquartered in St. Louis, Missouri, Hunter Engineering Company sells state-of-the-art wheel alignment systems, wheel balancers, brake lathes, tire changers, lift racks and brake testers. Hunter equipment is approved and used by vehicle manufacturers, automobile and truck dealers, tire dealers and automotive service facilities around the world.

11250 Hunter Dr.
Bridgeton, MO 63044
United States
Phone: 314-731-3020
Toll Free: 800-448-6848
Fax: 314-731-1776
Website: http://www.hunter.com

Want to know more about Hunter Engineering Company Get Info Now

Expand for more details on this Company

Get Info Now

Hunter Alignment Sensors, DSP600 Product From Hunter Engineering Company: The Hunter Alignment Sensors, No. DSP600 feature a patented design that speeds alignments, reduces downtime and provides a higher return on investment, according to the company. DSP600 Sensors utilize four high-resolution, digital cameras that offer the same high-speed screen updates as conventional sensors. Mounted on a pedestal, high enough to stay out of harm’s way, the patented four-camera system projects a wide field of view to continuously monitor wheel target position and orientation over a range of alignment lift heights.

Get Info Now

TCX Series of Tire Changers Product From Hunter Engineering Company: The Hunter Engineering next-generation of TCX Series Swing-Arm Tire Changers provides more rigidity, power and performance. The TCX53 Performance, TCX51 Professional and TCX50 Standard tire changers are each heaviest in class with more stiffness to handle today’s tough tires. Each tire changer also uses Hunter’s PowerOut bead loosener for the most powerful in-class bead breaking capability.

Get Info Now

Hunter Revolution tire changer Product From Hunter Engineering Company: The Hunter Engineering Revolution tire changer uses the same fully automatic process for all tire and wheel combinations, saving time on today’s diverse assemblies. The Revolution’s intuitive touchscreen interface indicates the operator’s current step and monitors progress throughout the procedure. The touchscreen also stores 15 helpful on-board videos. The Revolution also increases tire and wheel safety as all rim contact or near rim contact is plastic. The Revolution constantly monitors TPMS location and will not allow the tire to be mounted or demounted in an unsafe position. The leverless tool head demounting hook automatically deploys to catch and lift the bead and the mount head is designed to work with clad, raised spoke and other unique wheel designs. The Revolution features powered press arms for use when necessary for maximum control. Powered press arms adjust automatically when the diameter is set and power clockwise to prevent tire slippage. Damage-free bead loosening rollers loosen even the most stuck on soft sidewall tires.

Get Info Now

Winalign HD Alignment System Product From Hunter Engineering Company: The improved Hunter Engineering Winalign HD Alignment System can now use four or six revolutionary DSP700T heavy duty alignment sensors to provide accurate readings, even for three-axle trucks, in just four minutes. DSP700T sensors use exclusive roll-forward compensation to compensate all sensors at once without the need to jack each axle. DSP700T sensors are cordless and are compensated at the same time by Hunter’s unique pusher. These sensors are accurate to a range of 600" (1,524cm) to cover all truck, bus and trailer lengths. When equipped with the time-saving capabilities of Hunter's optional Fully Integrated Alignment Turnplate Kit (FIA), the system produces full vehicle measurements in as little as four minutes.

Get Info Now

Swing Air Jacks, No. RX16 Product From Hunter Engineering Company: The Swing Air Jacks, No. RX16, from Hunter can lift 9,000 lbs. The jacks make vehicle service easier and safer with lower clearance height, a 6" wider reach and many other productivity improving features. The jacks come compatible with older RX16, L44X, and P44X rack models capable of accepting 9,000-lb jacks.

Get Info Now

LED Rack Lighting Kit Product From Hunter Engineering Company: The LED Rack Lighting Kit by Hunter illuminates wheel alignment adjustment points for higher productivity in the alignment bay. It mounts higher on the runway surface for brighter and more focused illumination. The kit switches on and off automatically as the rack rises and lowers. They can be installed by a Hunter Service Representative during a new rack installation or at a future date as required.

Get Info Now

SmartWeight balancer Product From Hunter Engineering Company: Hunter's SmartWeight balancer can balance tires quicker than ever by automatically placing the tire in position where weights need to be applied and calibrating itself automatically without any input from the user. Also includes improvements to the GSP9200 platform such as a larger motor and drive system to handle wheels up to 44" in diameter and 175 lbs, new software with TPMSpecs database, cost-savings tracking software and support for a vehicle bar code scanning tool; and a wheel lift option to ease the mounting of heavy assembles.

Get Info Now

Inspection Lane Product From Hunter Engineering Company: Hunter Engineering's Quick Check helps shops find more work and thereby obtain more customer authorizations without setting up a lift or removing wheels. The system comes surface mounted, making relocation around the shop easy. The Quick Check features a B400 brake tester that can check brakes simply by stopping the car on top of the Inspection Lane, alignment-check equipment, an "inflation station" that automatically fills the right amount of air into the tires, computerized tire tread depth gauge and a battery tester. All measurements can be compiled into an easy-to-read printout. The process takes as few as three minutes.

Get Info Now

Quick Check drive under configuration Product From Hunter Engineering Company: Hunter's ceiling-mounted drive-under configured Quick Check system contains no moving parts and hangs from a standard bracket 10' above the floor, allowing it to be installed without floor area obstructions. The drive-under configuration comes with standard Quick Check accessories, including Quick Check console and rolling carts.

Get Info Now

ForceMatch HD balancer Product From Hunter Engineering Company: Hunter's ForceMatch HD balancer brings advanced vibration management and wheel uniformity measurement to the heavy-duty shop. The ForceMatch HD identifies runout and uniformity problems with every balance, using a load roller to measure assemblies. With this balancer heavy-duty shops have the capability to maximize tire life and improve ride quality by match-mounting wheels to optimize assembly roundness, pairing dual wheels by exact diameter, and performing a dynamic balance without excessive weight.

Get Info Now

Related Categories

Hunter Engineering Company