Florida Pneumatic Manufacturing

Florida Pneumatic Manufacturing

fp743a_10283834.png

Expand for more details on this Company

Torque Controlled 1/2" Impact Wrench, No. FP-745TCI

Product From Florida Pneumatic Manufacturing

The Florida Pneumatic Torque Controlled 1/2" Impact Wrench, No FP-745TCI, is the first torque-controlled 1/2" impact wrench to incorporate a graduated torque setting dial where the operator can select four specific torque settings in the forward direction (65 ft/lbs, 80 ft/lbs, 100 ft/lbs and 120 ft/lbs graduations within an accuracy 10 percent). The FP-745TCI has built-in indicator lights to show when the correct torque level is reached, and a digital display showing the actual torque level achieved. The FP-745TCI provides 800 ft/lbs maximum torque in the reverse direction, and features an easy change-of-direction bar. The FP-745TCI weights 5.1 lbs, incorporates a hard-hitting, twin-hammer mechanism, and a high-energy six vane 8500 rpm motor. The tool also features a 2” extended drive.

Get Info Now

Drive High Torque Angle Nut Runner, No. FP-727 and FP-727H

Product From Florida Pneumatic Manufacturing

The Florida Pneumatic FP-727 series is designed for professional auto techs that have a preference for the power of an impact wrench with the reach capabilities of a ratchet. Weighing in at only 4.3 lbs, the FP-727 angle nut runner delivers 180 ft/lb of reaction-less torque through its refined Jumbo hammer. This hammer design eliminates excess vibration and lateral movement, which increases power and reliability. With a maximum free speed of 6000 RPM, these tools provide the power and speed required for tight access fastener removal. 

Get Info Now

Reversible Drill, Nos. FP-985 and FP-986

Product From Florida Pneumatic Manufacturing

Florida Pneumatic's Reversible Drills, Nos. FP-985 (3/8" chuck) and FP-986 (1/2" chuck), come designed for users that have a preference for low weight precision drills with added power and performance. The FP-985/986 series provide modern designs that are also more compact and are lower in weight than other competitive brands, according to the company. These tools have a 3/5 hp motor that provides added stall resistance while the teasing trigger allows the user to harness the power. In addition, 2.5 m/sec vibration and 87dBA noise levels ensure quiet and smooth use.

Get Info Now

1/2" Impact Wrench, No. FP-750

Product From Florida Pneumatic Manufacturing

The Florida Pneumatic high-low torque/single hand operation 1/2” Impact Wrench, No. FP-750, allows for instant operating control and one hand operation. It has a “High-Low” torque switch that provides instant change of power in forward and reverse directions, from 800 ft/lbs to 150 ft/lbs. This feature, coupled with the push-button forward/reverse switch provides operating control with true one-handed operation. It weighs only 4.15 lbs and is powered by a six vane, 9,800 rpm motor. For added reliability and ease of maintenance, the FP-750 features a single piece motor housing/handle assembly.

Get Info Now

Angle Nut Runner, No. FP-727 and FP-727H

Product From Florida Pneumatic Manufacturing

The Florida Pneumatic Angle Nut Runner, Nos. FP-727 and FP-727H, offers technicians the benefit of having an impact wrench with the reach capabilities of a ratchet. This tool weighs only 4.3 lbs and offers 180 ft/lbs of reaction-less torque through its refined “jumbo hammer.” This hammer design eliminates excess vibration and lateral movement, which increases power and reliability. The tool’s design allows air to circulate through the angle head, eliminating overheating. Its lubrication system provides constant lubrication of gears and bearings eliminating the loss of lubricant from the angle head.

Get Info Now

1/2" Impact Wrench, No. FP-740TLI

Product From Florida Pneumatic Manufacturing

Florida Pneumatic's 1/2" Impact Wrench, No. FP-740TLI, incorporates a graduated torque setting dial whereby the operator may select four specific torque settings in the forward direction, an industry first according to the company. The torque settings come in graduations of 65 ft-lb, 80 ft-lb, 100 ft-lb and 120 ft-lb, while delivering a maximum 800 ft-lb torque in the reverse direction. The tool also features an "ECD" easy change of direction bar for ultimate efficiency when removing and replacing lug nuts. It weighs 5 lbs and delivers a maximum of 800 ft-lbs of reverse torque.

Get Info Now

FP-777A Super Duty 3/4"-drive Impact wrench

Product From Florida Pneumatic Manufacturing

The Florida Pneumatic FP-777A 3/4” Super Duty impact wrench has been designed specifically for heavy duty-high torque applications, in tire service and fleet repair shops.

The new tool features a refined design twin hammer mechanisms that increase the blow efficiency allowing the tools to obtain their maximum torque much quicker than competitor equivalents. The torque output on the FP-777A is 1,300 ft-/lbs. The high-energy seven blade motors increase speed of run-down and fastener removal. This tool also features a six-position power management switch for controlling power in both the forward and reverse directions, providing ultimate control on the job.

Get Info Now

FP-712-V Vibration Damped Air Saw

Product From Florida Pneumatic Manufacturing

The Florida Pneumatic FP-712-V vibration damped air saw has a short overall 6” length and all metal construction for added reliability. The tool accepts either power tool saw blades or standard blades. At 9,500 blows per minute, the FP-712-V provides fast, smooth, low-vibration operation, allowing more control on the job. 

Get Info Now

FP-1030-V and FP-1040-V series air hammers

Product From Florida Pneumatic Manufacturing

Florida Pneumatic offers the FP-1030-V & FP-1040-V series air hammers, available in either medium or long stroke options. These air hammers will fit standard 0.401” shank chisels and accessories. Florida Pneumatic also offers a screw-on needle scaling attachment that allows both tools to be easily converted to needle scalers. These hammers have a rubberized back cover and rubberized center located grip, allowing comfortable two-hand operation.

Get Info Now

FP-744A and FP-777A series 1/2" and 3/4" Impact Wrenches

Product From Florida Pneumatic Manufacturing

The Florida Pneumatic FP-744A and FP-777A 1/2” and 3/4” series of super duty impact wrenches have been designed specifically for heavy duty, high-torque applications, in tire service and fleet repair shops. The series features refined design twin hammer mechanisms that increase the blow efficiency. The high-energy seven blade motors increase speed of run-down and fastener removal. This series also features a six-position power management switch for controlling power in both the forward and reverse directions, providing ultimate control on the job. The FP-744A is available with a 2” extended drive anvil, and the FP-777A with a 6” extended drive anvil.

Get Info Now