Lock Technology, Inc. (LTI Tools)

Lock Technology, Inc. (LTI Tools)

locktechnology_10095028.png

Lock Technology has been bringing innovative tools to serve the professional technician for over 20 years.

  • 552 S. Washington St., Suite 108
  • Naperville, IL 60540
  • USA
  • Phone: 800-421-7241
  • Toll Free:
  • Fax: 630-983-5967
  • Website: http://www.ltitools.com

Want to know more about Lock Technology, Inc. (LTI Tools) Get Info Now

Expand for more details on this Company

LT598 ShockIt Socket Set

Product From Lock Technology, Inc. (LTI Tools)

The Lock Technology LT598 ShockIt Socket Set includes very low-profile sockets to fit over frozen nuts and bolts.  The sockets have a raised flat edge.  Included is a custom offset punch designed to fit the raised edge of the socket, allowing the technician to firmly and securely shock the fastener loose using a hammer.  Available in a 5-pc set with a custom punch and magnetic storage rail, this set includes the following sizes: 

Get Info Now

LT276 Self Locking Door Wedge

Product From Lock Technology, Inc. (LTI Tools)

Wedges today, especially plastic ones, have a tendency to slide out during use. The Lock Technology LT276 Self Locking Door Wedge has a wash board/wave ripple surface to it.  This allows easy entry between the door and rubber strip. The rippled wave-like surface securely locks the wedge in place making it almost impossible to slide out. This tool makes a g

Get Info Now

LT1800 4-pc Offset Impact Driver Set

Product From Lock Technology, Inc. (LTI Tools)

Frequently techs experience great difficulty removing frozen studs and bolts during strut, break hub, front end, exhaust, spring and suspension repair.The Lock Technology LT1800 4-pc Offset Impact Driver Set are forged with a 15-degree angle at the drive head end. The angle can be increased up to another 30 degrees due to a machined recessed well at the head of the tool. Four machined anti-turning slots at the base of the driver prevent the offset driver from turning during use in the impact chisel. Three sizes of well head available: 0.410", 0.530" and 0.725" reach the most inaccessible of fasteners. Also included is a 0.990” straight shaft non-turning air hammer.

Get Info Now

LT465 12mm and 14mm Wheel Hanger Guides

Product From Lock Technology, Inc. (LTI Tools)

Lock Technology's LT465 12mm and 14mm Wheel Hanger Guides slide into wheel lugnut holes without using threads saving the technician time, because they involve no turning the wheel guide to install and remove. Wheel hanger guides support wheel/tire so the technician can easily thread lugnut bolts into the brake rotor and avoid dropping the tire or having the outside section of the rim hit the floor and scratch. Made of durable bulletproof polycarbonate plastic. Works on Mercedes, Audi, BMW, Mini Cooper, SAAB and Volvo vehicles. Each kit includes one 12mm and one 14mm wheel hanger guide.

Get Info Now

LT991 Hollow End Line Taps

Product From Lock Technology, Inc. (LTI Tools)

Lock Technology's LT991 Hollow End Line Taps help rethread female fittings without line removal in order to make it easier to service A/C and hydraulic line fitting threads that become corroded over time and otherwise break when disconnected. The hollow-end tap slides over flared end of line easily, rethreading the female connector. This eight-piece kit covers all popular sizes including 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 27mm and 1 1/8". Can be used on brake, oil, transmission and heater lines. 

Get Info Now

Dual-sided universal oil cap removal tool, No. LT-265

Product From Lock Technology, Inc. (LTI Tools)

Lock Technology's dual-sided universal oil cap removal tool, No. LT-265, helps removed seized plastic oil caps. Oil caps on Toyota, Nissan, Hyundai and many imported manufacturers tend to seize up, even if the last mechanic to do the oil change lubricated the bottom. This tool easily removes oil caps without damaging them, including a slotted end that fits Toyota and most single fin oil caps and a double prong side that fits into slotted notched sides of Nissan oil caps. Prevents breaking the oil cap by attempting removal with an oil filter wrench or hammer and screwdriver.

Get Info Now

Inflatable Dent Remover No. LT-800

Product From Lock Technology, Inc. (LTI Tools)

The LT-800 Inflatable Dent Remover, from Lock Technology, uses hand pumped air pressure to push dents out from the inside of door and fender panels. Available in two sizes: The LT-805 (8" by 8" Square Inflatable Dent Remover) is for removing dents in tight corners or along welded seams and panel edges. The LT-810 (14" by 8" Oblong Inflatable Dent Remover) is for longer more accessible large dents. Each bag has 5' of air hose with an oversized hand pump bulb for long reach.

Get Info Now

Wet Sanding Block System, No. LT-250

Product From Lock Technology, Inc. (LTI Tools)

The LT-250 eliminates water buckets and hoses when wet sanding vehicles at your body shop. Utilizes 25 feet of plastic hose and has its own water regulator valve to control water flow. Fast, easy clean-up reduces mess on or around the vehicle. Hooks up to any standard water faucet or spigot.

Get Info Now

Lock Reforming Tool, No. LT-700

Product From Lock Technology, Inc. (LTI Tools)

Fits GM, Ford, Chrysler and most foreign cars. This tool instantly reforms damaged lock openings to their original contours.

Get Info Now

Magnetic Spray Gun Holder, No. LT-900

Product From Lock Technology, Inc. (LTI Tools)

The LT-900 will hold any cup or gravity fed spray gun without creating hols in your spray booth. The tubular design mounts to any flat steel surface with 160 lbs. magnetic force. The LT-900 is totally portable - hang it anywhere, move it any time. Not just for spray booths. The LT-900 is an all purpose magnetic holder for use on your tool box or anywhere else in the shop.

Get Info Now