Protek Test and Measurement

Protek Test and Measurement

No image available.

Expand for more details on this Company

6100 and 6300 DMM

Product From Protek Test and Measurement

Multi-function DMM Protek's multi-function DMMs No. 6100 and 6300 are auto-ranging and 4,000-count, with 3 3/4 digit display. In addition to measuring AC/DC voltages and AC/DC current and resistance, the models also offer duty cycle, frequency, capacitance, diode check and transistor test capabilities. 'Smart Jack' units light up to indicate appropriate input, and overload protection fuses may be reset without opening the meter case. Relative mode, data hold and sleep mode add to the functional ease.

Get Info Now

6030C and Dual Trace Analog Scopes

Product From Protek Test and Measurement

Right On Target Protek Test and Measurement introduces 2 new Dual Trace Analog Scopes'#8212;one featuring a component tester and the other, alternate magnification.

  • Model 6030C is equipped with a high brightness CRT, a 30-MHz bandwidth, an alternate trigger for display stability, and a built-in, push button-activated component tester to test inductors, capacitors and diodes via a characteristics waveform displayed on the screen. This model comes complete with probes, test leads, line cord and an operating manual.
Get Info Now

handheld DSO/DMM

Product From Protek Test and Measurement

A series of high performance, handheld DSO/DMMs have been introduced by Protek Test and Measurement featuring record lengths of 125 kB and real time sampling rates to 200 Ms/S. The new entries consist of the 60MHz Model (860), the 40MHz Model (840) and a 20MHz Model (820). The 40 MHz model also features a repetitive sampling rate of 2.5 Gs/S, and the 60 MHz Model has a rate of 5Gs/S. The dual channel DSOs have a deep 125kB record length as well as high sampling rates, ensuring an excellent tool for capturing high speed glitches and analyzing digital and analog signals in fine detail. Along with a built-in FFT for signal analysis, these DSOs provide 4 math functions, including a zoom function for expanding a segment of waveforms of interest; 20 automatic waveform measurements, and a USB interface for high speed communication with a PC. An optional USB host port Flash Memory significantly increases waveform storage capabilities. The Model 820 is priced at $1,072.00; the Model 840 at $1,336.00; and the Model 860 at $1,559.99. Standard accessories include AC/DC Adaptor, 7.2 V NiMH rechargeable battery pack, two x1x10 Oscilloscope Probes, USB cable with software, meter test leads, user manual, and holster. USB flash memory modules are optional along with clamp current probes and carrying pouch.

Get Info Now

digital multimeters

Product From Protek Test and Measurement

Protek Test and Measurement introduces two new cost-effective digital multimeters. The 80,000 count model No. 6800 has dual display and a basic DC accuracy of +/- 0.05%. It features a 3V, 5Hz to 5KHz square wave generator, duty cycle measurement and RPM capability. Other features of the 6800 include:

Get Info Now