Wright Tool Co.

Wright Tool Co.

No image available.
Wright Tool offers more than 4,000 tools for the industrial, contractor, and MRO markets.
  • 1 Wright Dr.
  • PO Box 512
  • Barberton, OH 44203
  • USA
  • Phone: 330-848-0600
  • Toll Free: 800-321-2902
  • Fax: 800-543-2095
  • Website: http://www.wrighttool.com

Want to know more about Wright Tool Co. Get Info Now

Expand for more details on this Company

Expanded Cougar Pro line of hand tools

Product From Wright Tool Co.

Wright Tool adds the combination wrench and reversible-ratcheting combination wrench sets to their Cougar Pro line hand tools. 

The Cougar Pro combination wrenches are available in two SAE sets and two metric sets. The 11-pc SAE set (No. E911) and the 14-pc SAE set (No. E914) consist of wrenches ranging in sizes from 3/8" to 1-1/4". The 11-pc metric set (No. M950) and the 18-pc metric set (No. M958) consist of wrenches ranging in sizes from 7mm to 24mm.

Get Info Now

WrightGrip wrenches

Product From Wright Tool Co.

Wright Tool Company offers WrightGrip, an innovative, high-strength, anti-slip design on the manufacturer’s open-end style wrenches. The design is now available on Wright Tool open-end and combination wrenches in a range of metric sizes from 7mm to 24mm. The design incorporates a series of strategically placed teeth or grooves on the insides of the wrench’s two jaws. These teeth allow for a better seating of the wrench on a fastener. One fastener corner locks into the groove so the fastener won’t slip or twist out of the wrench under load. 

Get Info Now

Updated line of adjustable wrenches

Product From Wright Tool Co.

Designed for professionals, the Wright Tool's adjustable wrenches feature extra-wide jaw openings. The wrench is designed with a flat nose and thin, tapered head for easier access. Available in three different finishes: satin finish, satin finish with cushion grip, and industrial black. The adjustable wrenches come in a complete range of sizes from 6" to 12", with maximum opening capacities of 15/16" to 1-1/2". Forged from single bars of high quality, USA steel, Wright Tool adjustable wrenches are made in the U. S., and carry a lifetime guarantee against defects in workmanship.

Get Info Now

Strike-Free Wrenches

Product From Wright Tool Co.

Wright Tool Strike-Free Wrenches are specifically designed for use where false blows are not permitted. The wrenches also loosen and tighten large fasteners in confined areas where there is not enough room to swing a striking tool. Available in 2' and 3' handle sizes, with 12-point wrench openings ranging in 17 sizes from 1" to 2" in diameter. Professional-grade and manufactured for high-strength, durability and reliability, these tools are made in the U.S.A.

Get Info Now

2009 Wright Tool catalog

Product From Wright Tool Co.

Featuring a new updated look, the 406-page 2009 Wright Tool product catalog provides descriptions, specifications and part numbers for all the Wright Tool product lines.

Get Info Now

Expanded product line with 73 new items

Product From Wright Tool Co.

Wright Tool has expanded its product line with 73 new items including impact sockets, adaptors, pin and drift punches, pry and separating bars and chisels. Additional products that were added include line-up bars, as well as a lighted telescopic pick-up tool and a mirror for locating and retrieving items.

Get Info Now

Expanded Line

Product From Wright Tool Co.

Wright Tool has expanded its product line with 73 new items including impact sockets, adaptors, punches, bars and chisels. Both standard and deep 3/4-inch drive impact sockets are now available with up to 3-inch openings. Standard and deep 1-inch drive impact sockets are available with up to 4-1/2-inch openings. Standard 1-1/2-inch drive impact sockets are available with up to 6-1/2-inch openings. A 1-1/2 inch female to 2-1/2-inch male impact adaptor was added, along with a 1-inch male slugging wrench adaptor for driving impact sockets.

Get Info Now

line of adjustable wrenches

Product From Wright Tool Co.

Featuring a chrome or black oxide finish, Wright Tool's adjustable wrenches are available in eight lengths, ranging from 4" to 24". The extra-wide jaw opening is standard on lengths 6" to 12" to accommodate bigger nuts and bolts. The new jaw design provides a better grip, which avoids slippage or nut round off, while its creep feed ground parallel face assures smooth, tight operation. The tool's four-thread knurl and non-protruding jaw offer greater capacity and minimal head width, improving performance in confined spaces.

Get Info Now

Line of torque multipliers

Product From Wright Tool Co.

Wright Tool Company offers a complete line of torque multipliers in three styles: universal tube, plate reaction and foot reaction. Tools range in output capacity from 750 ft./lbs. to 8,000 ft./lbs. A torque conversion chart is conveniently attached to the multiplier to show the operator the input torque required for a given torque output.

Get Info Now

1/4", 3/8", 1/2", 3/4" and 1" drive "Click Type" Torque Wrenches

Product From Wright Tool Co.

For secure and precise fastening applications Wright Tool offers micro-adjustable, "click type" torque wrenches in 1/4", 3/8", 1/2", 3/4" and 1" drive sizes. These wrenches feature an easy-to-read exposed dual scale in either in./lbs. or ft./lbs., and Newton meters. All of the wrenches operate in both clockwise and counterclockwise directions.

Get Info Now