Santech Industries

Santech Industries

No image available.
  • 2450 Handley Ederville Rd.
  • Fort Worth, TX 76118
  • USA
  • Phone: 817-589-1212
  • Toll Free:
  • Fax: 817-589-5900
  • Website: http://www.santech.com

Want to know more about Santech Industries Get Info Now

Expand for more details on this Company

Portable Refrigerant Recovery Machine, No. MT1732

Product From Santech Industries

The Santech Industries portable Refrigerant Recovery Machine, No. MT1732, provides technicians an efficient, safe and reliable solution for refrigerant recovery. The MT1732 is both Industrial HVAC and ARI-700 certified to handle CFC,

Get Info Now

MT1400 Compressor Electronic Control Valve Tester

Product From Santech Industries

The Santech Industries MT1400 Compressor Electronic Control Valve Tester can test electronic control valves in variable displacement compressors. The tester can be placed in-line between the compressor control valve and wiring harness connector, so control valve issues can be diagnosed before condemning the compressor. The electronic control valve regulates internal compressor pressure to change compressor displacement. The tester regulates the input signal to the control valve to verify the valve operation. A compressor with a low-pressure differential may simply have a defective or dirty electronic control valve or not be receiving the proper voltage signal to the control valve.

Get Info Now

Thermistor Tester, No. MT3701

Product From Santech Industries

Santech Industries Thermistor Tester, No. MT3701, specifically tests thermistor and sun load sensor circuits. The tester can be placed in-line between the sensor and wiring harness connector. It operates on an ohm signal. The unit has an ECM mode which reads the signal and manual mode that can change input signals. This helps check if the sensor can have an effect in turning the A/C compressor off and on. In this way, the tool can verify if a sun load sensor needs to be replaced. The Kit includes one set of universal leads.

Get Info Now

Transducer Tester, No. MT3700

Product From Santech Industries

Santech Industries' Transducer Tester, No. MT3700, can be placed in-line between the transducer and wiring harness connector. The unit has ECM mode which reads the voltage and manual mode that can change input signals for vehicle operations like A/C, fan clutch or cooling fan operations. It can be used on any transducer using a three wire sensor with a 5V power and reference signal return to the ECM. The kit includes dedicated Chrysler, Ford and GM connectors; and one set of universal leads.

Get Info Now

Thermometer Kit, No. MT3720

Product From Santech Industries

Santech Industries' Thermometer Kit, No. MT3720, contains a dual read-out thermometer with J/K type thermo clamps and probes. The probes use the J/K type connectors allowing for a combination of probe usage. It provides probes for various temperatures to be use for the testing of components on different parts of the vehicle. The thermo clamps and probes can read between -58 degrees F to 1292 degrees F. It includes a rubber protective cover for the thermometer and plastic carrying case. The kit also includes an assortment of probes and extension leads.   

Get Info Now

MasterChem Lubricant Enhancer

Product From Santech Industries

The Chemistry behind MasterChem's Lubricant Enhancer is that it establishes a "boundary film" laminating the internal walls of the entire A/C system and compressor to keep debris such as metal particles and Teflon deposits away from moving components. The Lubricant Enhancer reduces the lubricant buildup inside the heat exchangers from 3-4 ml thickness coating on the walls to a 0.5 ml "boundary film" significantly improving heat exchange. By chemically placing the lubricant in the "boundary film" the system now has improved lubricant return to the compressor and thermal transfer at the condenser and evaporator.

Get Info Now

A/C Valve Core Tool System

Product From Santech Industries

Santech's A/C Valve Core Tool System is available as a kit, No. MT1470, or as individual items. The system is designed to remove valve cores without damage to the valve core or fitting, and install them to the OEM torque settings. Additional adapters aid in hard-to-reach applications. Torque settings for each valve core are printed on the insert card in each kit. Bits are tool steel and chrome-plated.

Get Info Now