Mo-Clamp/Pull-It Corp.

Mo-Clamp/Pull-It Corp.

moclamppullitcorp_10094461.png

Manufacturer of Mo-Clamp collision repair tools, accessories, chain and measuring gauges, all backed by the Mo-Clamp "forever" warranty.

  • 6920 SW 111th Ave.
  • Beaverton, OR 97008
  • USA
  • Phone: 800-678-5548
  • Toll Free: 800-678-5548
  • Fax: 503-644-2733
  • Website: http://www.moclamp.com

Want to know more about Mo-Clamp/Pull-It Corp. Get Info Now

Expand for more details on this Company

Reverse Pull Clamp No. 4215

Product From Mo-Clamp/Pull-It Corp.

The Mo-Clamp Reverse Pull Clamp, No. 4215, allows techs to grab on to a reverse-facing weld or piece of metal and pull it out, without worrying about whether the clamp will slip or slide. The bar has a 30 percent bend to allow for easier hook-up. The plate can also easily be flipped over to provide the reverse angle of pull. The plate’s holes are designed to allow the clamp head to swivel slightly, in either direction, to provide the user an opportunity to get the exact angle of pull that’s needed. Made in U.S.A.

Get Info Now

Bolt Puller

Product From Mo-Clamp/Pull-It Corp.

The Bolt Puller from Mo Clamp is designed to allow the technician to get a straight, even pull on the center of a bolt. Originally intended for lower suspension areas as a way to pull floor pans down after being pulled up in a suspension hit, the Bolt Puller is also great on helping straighten frame horn ends on light trucks and vans. Made from Mo-Clamp Tru-Tuff steel alloy and rated at 2.5 tons pulling capacity, door pillar bolts will yield quickly to the strength of this tool.

Get Info Now

All-Angle Clamp

Product From Mo-Clamp/Pull-It Corp.

This multi-angle pulling clamp from Mo-Clamp allows a technician to use the smaller jaw width to access tough areas where other clamps normally will not reach. The attached bracket can be swiveled to accommodate pulling from any direction. Pulls can be made right-angle, straight, twist, roll, up and down. Made of Mo-Clamp Tru-Tuff steel alloy in the USA.

Get Info Now

Tight Opening Clamp

Product From Mo-Clamp/Pull-It Corp.

Mo-Clamp's improved Tight Opening Clamp features a long nose and direct pull capabilities. The Tru-Tuff steel alloy clamp is 8 3/4", 5 lbs., has a 3-ton capacity. It can get into tight spots and provide superior pulling power.

Get Info Now

Bolt Puller 1340

Product From Mo-Clamp/Pull-It Corp.

At 1.7 lbs. and 6", Mo-Clamp's Bolt Puller, No. 1340, is designed to help techs get a straight, even pull on the center of a bolt. Originally intended for lower suspension areas as a way to pull floor pans down after being pulled up in a suspension hit, the Bolt Puller is also ideal for straightening frame horn ends on light trucks and vans. This tool is made from Mo-Clamp Tru-Tuff steel alloy and rated at 2.5 tons pulling capacity.

Get Info Now