Lisle Corporation

Lisle Corporation

lislecorp_10094403.png

Basic manufacturer and marketer of innovative specialty automotive tools, mechanic's creepers and lubrication & tire products. Headquarters and manufacturing operations are located Clarinda, IA.

  • PO Box 89
  • 807 East Main Street
  • Clarinda, IA 51632
  • USA
  • Phone: 712-542-5101
  • Toll Free:
  • Fax: 712-542-6591
  • Website: http://www.lislecorp.com

Want to know more about Lisle Corporation Get Info Now

Expand for more details on this Company

Coil-On-Plug Spark Tester, No. 20700

Product From Lisle Corporation

The Lisle Coil-On-Plug Spark Tester, No. 20700, provides an easy way to check ignition systems with coil-on plugs. This tool offers the quickest way to test for no-start conditions, according to the company. High-visibility white lettering makes it easy to read the gap measurement from 0 to 40k, the round knob provides easy gap adjustment and the 12" ground wire comes with a shielded clip. Applications include Ford, Chrysler, Mitsubishi, Nissan and more. The standard plug wire tip can be unscrewed so the tester can be used on small engines and some motorcycles.

Get Info Now

Wire Insertion Tool Set, No. 61030

Product From Lisle Corporation

The Lisle Wire Insertion Tool Set, No. 61030, includes the 1/4" O.D. and 3/8" O.D. wire insertion tools for installing or repairing audio equipment, aftermarket lighting, alarm systems and much more. With a sharp point on the end and palm-size handle, these tools provide extra leverage to pierce through firewalls, rubber grommets and panels. The 10-1/2" steel tube provides easy access to feed wires through the firewall. These tools are also available individually.

Get Info Now

Door Latch Release Tool, No. 34920

Product From Lisle Corporation

The Lisle Door Latch Release Tool, No. 34920, is used to release the cable from the handle assembly so that a vehicle's door panel can be removed. This tool is designed to work on 2007-2013 Chevy and GMC pickups, Suburban, Tahoe, Avalanche and Yukon vehicles. This release tool weighs 2 oz. To use, release the panel from the vehicle door. Pull the panel away from the door and locate the handle assembly. Slip the tool end around the cable. Press the tool over the connector to compress tabs and release the connector from the housing. The cable end can then be removed from the handle pull. 

Get Info Now

Diesel Filter Wrenches for Davco products, Nos. 61090, 61110 and 61130

Product From Lisle Corporation

The Lisle Corp. Diesel Filter Wrenches for Davco products, Nos. 61090, 61110 and 61130, are designed to remove and replace the main filter collar as well as the vent cap on aftermarket diesel fuel filter systems. The unique half-moon design provides easier access to the fuel filter, according to the company. High-strength steel prevents the wrench from flexing while loosening filter collars, four teeth grab the vent cap securely to prevent damage and a thick, padded grip cushions users hands. The 61090 wrench fits 5" Davco 242/243 aftermarket fuel filter systems, the 61110 fits 6" Davco 382 aftermarket fuel filter systems and the 61130 fits 8" Davco 482 aftermarket fuel filter systems. 

Get Info Now

Heater Core Backflush Tool, No. 60900

Product From Lisle Corporation

The Lisle Heater Core Backflush Tool, No. 60900, is an adjustable-pressure industrial spray gun with a stepped-tip design for easy heater core flushing. The tip fits 1/2", 5/8" and 3/4" hose fittings. Water pressure can be easily controlled with one hand by squeezing the handle of the heavy duty spray gun. The insulated handle protects hands when using hot water to flush the cooling system. The spray gun attaches to a standard garden hose. This is made in the U.S.A.

Get Info Now

Lisle Wheel Stud Pilot Pin Set, No. 13950

Product From Lisle Corporation

  
The Lisle Wheel Stud Pilot Pin Set, No. 13950, makes it easier to remove and install wheels on many European vehicles with lug bolts. Three pairs of metric threaded wheel stud pilot pins allow users to hang the wheel without having to balance the wheel on the small lip of the hub. This helps prevent the wheel from falling and causing damage or injury. Users can simply insert the proper size threaded pins into hub bolt holes to hold the wheel in place while inserting or removing lugs. This set includes 12mm by 1.5mm, 14mm by 1.25mm and 14mm by 1.5mm threaded pins, which are also available individually.

Get Info Now

Mini Zero-Degree Ratchet Combo Kit, No. 61200

Product From Lisle Corporation

The Lisle Mini Zero-Degree Ratchet Combo Kit, No. 61200, is a toothless, infinite ratchet housed in a reversible, anodized aluminum body. These tools work where a standard screwdriver or ratchet can't fit. The driver can be flipped to switch from clockwise to counter-clockwise drive. The set includes a 1/4" square drive, a 3/8" square drive and a 1/4" hex magnetic bit driver for 1/4" bits. The kit also includes a set of six 1/4" drive bits, which are also available individually. These are made in the U.S.A.

Get Info Now

Swivel-Gripper 9 Pack, No. 57160

Product From Lisle Corporation

Lisle's Swivel-Gripper, No. 57160, comes with nine Swivel-Gripper "no-slip" filter wrenches. They allow technicians to feel the patented textured coating on the inside of the wrench band. Individual Swivel-Gripper filter wrenches can be ordered to refill the display as needed. All four wrench sizes come in the pack. Made in the USA.

Get Info Now

T-55 Torx Head Bolt Bit, No 56600

Product From Lisle Corporation

Lisle's extended 3" long T-55 Torx Head Bolt Bit, No 56600, can be used with 1/2" socket or on head bolts on Chrysler 2.4L new world engines. The bit comes made from durable S2 steel. These bolts come deeply recessed in the engine block so standard length bits will not work. Made in the USA, the tool can be used on the following Chryslers: 2007 - 2011 Caliber AWD or R/T, 2011 - present 200, 2007 - 2010 Sebring, 2008 - present Avenger, 2009 - present Journey, 2007 - present Compass, 2009 - present Patriot.

Get Info Now

90 Degree 1/2" Driving Wrench, No. 43500

Product From Lisle Corporation

Lisle's 90 Degree 1/2" Driving Wrench, No. 43500, works where an impact wrench won't fit. It has a right angle design that gives the technician access to hard-to-reach bolts. The tool works on harmonic balancer bolts, transmission bolts, cam bolts and others. It will both loosen and tighten. Use with an air hammer and the 43370 Driving Wrench, which can be purchased individually or used with Lisle's 43300 Pneumatic Fan Clutch Wrench Set, 1/2" breaker bar and 1/2" impact sockets. Made in the USA.

Get Info Now