La-Man Corp.

La-Man Corp.

No image available.
  • 700 Glades Ct.
  • Port Orange, FL 32127
  • USA
  • Phone: 800-348-2463
  • Toll Free: 800-348-3463
  • Fax:
  • Website: http://www.laman.com

Want to know more about La-Man Corp. Get Info Now

Expand for more details on this Company

Refrigerated Extractor Dryer

Product From La-Man Corp.

 

The La-Man Refrigerated Air Dryer provides reduced dewpoint temperatures and air-line filtration for a wide variety of compressed air applications. This dryer uses a unique, three-in-one heat exchanger to pre-cool the air, to refrigerate the air, which condenses out all liquid vapors, and to return heat to the air, which prevents downstream pipe sweating and condensation. This dryer offers an on/off switch, a power-on light, a dewpoint indicator, a programmable, timed solenoid drain, quiet operation and a compact footprint. The maximum Inlet pressure is 232 psi. 

Get Info Now

Refrigerated Air Dryers

Product From La-Man Corp.

La-Man Corporation's Refrigerated Air Dryers provide reduced dewpoint temperatures and air line filtration for a wide variety of compressed air applications. Employs a 3-in-1 heat exchanger to first pre-cool the air, second to refrigerate the air to condense out all liquid vapors, and third return heat to the air to prevent downstream pipe sweating and condensation. Product features include an On/Off switch, power-on light, dewpoint indicator and a programmable timed solenoid. Has a maximum inlet pressure of 232 PSI.

Get Info Now

SuperStar .01 Micron Filter

Product From La-Man Corp.

La-Man Corp.'s SuperStar .01 Micron Filter for compressed air systems is a four-stage filter designed to operate most effectively within 25' of the point-of-use. By incorporating a charcoal absorption element, the filter offers a standard .01 Micron rating with flow ranges of 50 SCFM, 75 SCFM or 100 SCFM and pressure ratings of 250 psi. Additional features include built-in differential pressure gauges and an automatic float drain.

Get Info Now

Extractor/Dryer filter for compressed air systems

Product From La-Man Corp.

With flow ranges of 15 SCFM to 2000 SCFM and pressure ratings of up to 250 psi, the La-Man Extractor/Dryer works on an array of applications including air powered tools, surface preparation, paint spraying, powder coating and pneumatic operated equipment. Providing filtration for compressed air systems, the Extractor/Dryer has a two-stage filter designed to operate most effectively within 25' of the point-of-use. Each model offers a standard 5-micron rating with lower micron ratings available.

Get Info Now

Refrigerated Extractor Dryer

Product From La-Man Corp.

La-Man Corporation offers a series of Refrigerated Extractor Dryers to provide reduced dewpoint temperatures and air line filtration all in one unit for a wide variety of compressed air applications. The Refrigerated Extractor Dryer uses refrigeration to cool the air to condense aerosols into liquid contamination. The Extractor Dryer is used in the cold circuit to remove the liquid contamination where it is formed. The Extractor Dryer also filters solid particles down to 5 microns. The clean dry air is then reheated to a useable temperature prior to exiting the device. 

Get Info Now

AMD-035 SuperStar Membrane Dryer

Product From La-Man Corp.

La-Man's AMD-035 SuperStar Membrane Dryer provides ultra-clean and ultra dry compressed air and lowers the dew point by continuously removing water vapor and venting into the surrounding atmosphere. The AMD-035 includes the pre-filtration system that incorporates a high-efficiency coalescing filter into the process. The standard automatic float drain will allow for the discharge of moisture from the Extractor/Dryer while preventing any system air loss.

Get Info Now

SPG100 and SPG103 Pneumatic In-Line Dryers

Product From La-Man Corp.

LA-MAN Corporation's Pneumatic In-Line Dryers, the SPG100 and SPG103, are designed to act as point-of-use filters that efficiently remove moisture and contaminants to improve and extend the life cycle of air-powered hand tools and spray equipment. Available with either 1/4" or 3/8" NPT connections, these dryers operate the best within 6' of the point of use. Encased in a durable brass housing, each filter offers a standard 5-Micron rating and a full 20 SCFM of air flow, while needing replacement only every 30 days.

Get Info Now