The thin-wall design of chrome hand sockets has been combined with the strength and durability of GP Impact Sockets to create the Grey Pneumatic DUO-SOCKET® series. Built specifically to address...
Grey Pneumatic introduces a series of Impact Wobble Extensions made specifically for impact tools. These extensions provide up to 15 degrees of deflection, allowing standard impact sockets to be...
The Triple Square Impact Drivers from Grey Pneumatic come in standard and 4" extended lengths. The impact drivers are used on Volkswagens, Porsche and Audi as well as Detroit Diesel engines...
Now available from Grey Pneumatic is a wide range of 12-point impact sockets in 3/4" and 1" drives. The 3/4"-drive fractional sizes range from 3/4" to 2-1/2", and the metric sizes go from 19 mm to...
Grey Pneumatic introduces their new +" and 1" drive Universal Impact Sockets that are available in fractional and metric sizes up to 2" or 50mm, 6-point hex. The 1" drive features a rotating ball...
Grey Pneumatic offers extended sizes in their 1/2"-Drive Universal Impact Socket Sets. Their 14-piece fractional set contains sizes from 7/16" through 1-1/4", and their 13-piece metric set contains...
New from Grey Pneumatic their 9748 1/4"-drive Combination impact socket set, which the company feels is like four unique tool kits in one, with fractional sizes of 3/16" to 9/16" and metric sizes of 4...
Now available from Grey Pneumatic are 3/4" Drive Master 6 Point Impact Socket Sets providing fractional coverage sizes 3/4" '#8211; 2-1/2". Complete sets include the standard length 29-piece set No...
Grey Pneumatic’s sleeve-type low-profile adapters reduce larger drive sizes for use on smaller drive tools. They are a vailable in seven different sizes, from 2-1/2” to 1/4” drives. A...
Now Available from Grey Pneumatic is their full line of Impact Chisels in .401 and .498 shanks. Each tool is made from high-quality steel and designed for a specific job or application in providing...
New from Grey Pneumatic is their line of 3/4" and 1"-drive impact socket sets. The 3/4"-drive sets include sizes from 3/4" to 2-1/2" hex, or 19 mm to 50 mm. The 1"-drive sets are available in 3 models...
Grey Pneumatic's 4-Point Pipe Plug Sockets are offered in an 11pc. set, No. 1211P, and contain male sizes 3/16" to 3/8" and female sizes 1/4" to 3/8". Sockets come in a molded storage case and carry a...
Grey Pneumatic introduces two thin-wall impact universal joints with 3/8" (1129TUJ) and 1/2" (2229TUJ ) drives. The company feels a thinner wall can help improve access to tight underhood and...
New from Grey Pneumatic is their 1642RD 3/8"-drive, 12-point, 42-piece Master Impact Socket Set. This complete set offers fractional and Metric sizes in both standard and deep lengths, plus a 3...
Grey Pneumatic adds value to universal sets Grey Pneumatic has added extended sizes to its 1/2"-drive universal six-point impact socket sets. With a full range of sizes, these complete sets are...
Pipe Plug Socket Set The new 3/8" Drive Pipe Plug Socket Set from Grey Pneumatic (1211P) contains male socket sizes from 3/16" to 3/8" and female sizes from 1/4" to 3/8", which are useful for removing...
New from Grey Pneumatic is their line of 3/8"-drive Universal Impact Socket sets, which are available in both standard and deep lengths, as well as fractional and metric sizes. The 12-piece...
Grey Pneumatic now has a 12-piece 1/4", 3/8" and +" drive Tamper-Proof Torx Driver Set for Impact or Hand tool use (Set No. 1235TT). The Tamper-Proof design allows access to special fasteners in a...
Grey Pneumatic offers a complete 1/2" Drive Impact Hex Driver Set providing both fractional and metric coverage. The 18-piece set, No. 1598HC, contains fractional sizes 1/4"-3/4" and metric sizes...
Grey Pneumatic introduces their 3/8"-drive series of extended length Impact Torx drivers. With an overall length of 5.91", the new hand tools are designed for hard-to-reach areas, as well as...
Grey Pneumatic's full line catalog includes their complete range of impact sockets, chisels and attachments, along with some new additions, such as the 3/4" Drive T-Handle Tool with a sliding drive...
Grey Pneumatic 12-point universals are a new addition to their 1/2" drive line of impact sockets. Sizes are available in both fractional and metric. The sockets are offered individually or in the...
Grey Pneumatic now offers 1/2" Drive Metric Master Impact Socket sets. The 6-point sets are available in both standard (No. 1326M) and deep (No. 1326MD) lengths. Sizes range from 10mm to 36mm...
Grey Pneumatic introduces their extensive line of 12 Point Impact Sockets designed for professional tool users. They are engineered specifically for use with impact tools, and are made from high...
Grey Pneumatic introduces their 9298HC 1/4"-drive Impact Hex Driver Set. The 14-piece set comes with fractional sizes from 1/8" through 3/8" and metric sizes from 2 mm through 10 mm in a molded...
