- PO Box 847, Airport Industrial Park
- Winona, MN 55987
- Phone: 800-533-8010
- Toll Free: 800-533-8010
- Website: http://www.goodson.com
Want to know more about Goodson Get Info Now
Company Profile | Request more information
Company Profile | Request More Information
Want to know more about Goodson Get Info Now
Expand for more details on this Company
The Analog Valve Spring Tester from Goodson helps engine rebuilders save parts and do the job properly. It has a 600-lb capacity which can be applied in 10-lb increments. The tool features a 5" diameter Ashcroft quality analog pressure gauge, spring platform handles springs up to 2" diameter by 4.5" overall height, press assembly height adjustable in 1/2" increments, pressing anvil adjustable in 1" increments, adjustable vertical scale that rotates 180 degrees for left or right reading, ergonomically designed T-handle gives firm control, T-gandle that incorporates an over-center lock for positive locking in fully depressed position and more.
Goodson's Delta Cap Cutter Premium Grinding Wheel comes specifically designed to fit the Delta Cap Cutter model 6200XHD. It has a 7" OD, 5-1/2" ID and comes 1-1/2" thick." The abrasive is plate counted and balanced for smooth grinding. It can be used on welded main caps.
The Pushrod Cleaning Brush from Goodson has tapered bristles to make cleaning pushrods with an ID down to .080" easy. The brush also measures 12" long to fit most pushrods. It's important to clean the insides of your pushrods when rebuilding an engine, because not cleaning the ID of the pushrods risks contaminating the engine. A hot tank often cannot get the gunk and sludge off the pushrods.
Goodson's Wall HangerRack allows the 12 Quart Engine Pre-Lube Tank to be mounted to the wall for easy access. It includes the hanger for the Pre-Lube Tank,a bin for fittings, a Goodson Measurement Equivalency Chart and Shop Towel Rack including 1 roll of heavy duty blue shop towels. The tank itself includes a pop-off pressure release valve, corrosion-resistant aluminum tank, 8' long by 1/4" diameter fill hose with swivel end, 1-3/4" fill hole, handle for quick and easy transport from one job to another, easy to read pressure gauge and #2 standard fitting and 1 LS fitting.
Goodson's Diesel Core Drills and Reamers fit 8.0mm applications. Several Valve Seat Cutter Blades are also available for its 3-D Fast Cut Multi-Angle Cutting System specifically sized for diesel intake seats.
Goodson's Valve Seat Grinding Wheels provide stones from 1/2" diameter all the way up to 5" diameter using a Nickel Chrome abrasive formula. These larger stones can also be purchased in General Purpose and Cool Blue formula.
Goodson's tapered wrist pin bushing press kit can remove and replace tapered bushings in diesel applications with wrist pin diameters up to 54mm. The press base is designed to work with a shop's hydraulic press to ease tapered pins into and out of connecting rod eyes. The complete tapered wrist pin bushing press kit includes 19 Bushing Drivers ranging from 25 to 54mm in diameter. The complete kit also includes a set of parallels that adapt the design to accommodate straight wrist pin bushings as well as the tapered style.
Goodson offers a wide range of valve spring compressors, including two valve spring benches. The pneumatic model (No. PSB-5000) comes designed to work on virtually any multiple valve head and can be used on heads with recessed springs. The tool's pneumatic valve support holds the valve closed as users compress the spring. This press includes a head that adjusts 25 degrees in either direction, a table that adjusts 45 degrees to the front and 30 degrees to the rear and a foot pedal for hands-free operation. The manual valve spring bench (No. CF-500) can be used to work on heads with recessed springs. The head can be adjusted 25 degrees to the left or right for canted valves. Both units ship fully assembled.
Goodson offers a wide range of valve spring compressors, including the pneumatic model No. PSB-5000, designed to work on virtually any multiple valve head and ideal for heads with recessed springs. A key feature is the pneumatic valve support that holds the valve closed as you compress the spring. Features include a head that adjusts 25 degrees in either direction, a table that adjusts 45 degrees to the front and 30 degrees to the rear and a foot pedal for hands-free operation. The unit ships fully assembled.
The 2012 edition Goodson Product Catalog features an entirely new section of brake service tools and supplies, due to the recent acquisition of the assets and product lines of Goodtool Brake Service Tools & Supplies. Among the products featured are three grades of brake lathe replacement tips and holders, silencer bands, mounting adapters and a wide range of replacement parts for most popular brake lathes.