G-Tec

G-Tec

gteclogo_10280190.png
  • PO Box 1079
  • 408 S. Main Street
  • Nixa, MO 65714
  • USA
  • Phone: 417-725-6400
  • Toll Free: 800-725-6499
  • Fax: 417-725-3577
  • Website: http://www.g-tec.com

Want to know more about G-Tec Get Info Now

Expand for more details on this Company

DAQ data acquisition system module

Product From G-Tec

The G-Tec DAQ data acquisition module (with print out) can be added to any current G-TEC flusher, or can be factory installed. This module allows users to take a snapshot of the current  at the push of the button, any time during the flushing process. The print out reports start time, temperature, input PSI, output PSI and flow in

Get Info Now

Aisin Warner solenoid rebuild kits

Product From G-Tec

G-TEC’s Aisin Warner solenoid rebuild kits come complete with a how-to DVD so the technician can rebuild a whole array of different solenoids instead of stocking multiple different components. With this kit costs can be cut because a solenoid can be rebuilt by re-using its can and changing out bushings and sizing reamers. This is much more economical than buying a whole other solenoid. Comes with self lubricating thrust washers, solenoid adjustment templates and sealing rivets to fine tune the job.

Get Info Now

UFO filtration system

Product From G-Tec

G-TEC's UFO filtration system has a single-blot 4" 28 micron checkable, cleanable, and re-usable filter.  It has only one bolt through the center of the round filter housing, so with only fastener to loosen and tighten when servicing the filter, this reduces operating time and labor cost. The filter screens fit the two most popular heated cooler line flusher in use in today's modern transmission shops. The filter has a 1000 applications and can be used to filter most any kind of liquid, according to the manufacturer.  

Get Info Now

BlueReach E-Zee Shift Dyno Controller

Product From G-Tec

BlueReach's E-Zee Shift will be featured on all G-Tec transmission dynos. The E-Zee Shift allows testing of modern CAN bus-controlled transmissions, as well as having the capability of monitoring 16 different types of data from the transmission being tested (e.g. flow rate, temperature, multiple oil pressures). The E-Zee Shift offers a digital display of the data, the solenoid states and their actual current, as well as a printout of the results in a pass/fail report. The program is compatible with a touch screen interface on a Windows 7 operating system.

Get Info Now

TurboTank optional filter system

Product From G-Tec

G-Tec announces the optional filter system for all TurboTank and G-TEC heated cooler line flushers in a ready-to-install kit. Users can add the 4”, 28-mircon filter screen system to their G-Tec flushers to see what’s coming out of the cooler and lines when flushing systems. These filter kits are a one-time investment, never wear out, are checkable and cleanable. G-TEC also offers 4” 28 micron filter screens that will fit other makes of hot oil flusher on the market at a very completive pricing.

Get Info Now

Test Chamber II

Product From G-Tec

G-TEC’s Test Chamber II is made from a Welded Iron body and the lead is made of Billet Aluminum. The basket has more then 26 square inches of surface, is magnetically charged with two powerful rear earth magnets which trap the furious metals, even the finely ground particles which are smaller then 24 microns which are suspended in the ATF.

Get Info Now

Auto Controlled Emersion Heater

Product From G-Tec

G-TEC’s Auto Controlled Emersion Heater saves energy by automatically controlling the temperature of the oil; hot enough to open Thromswitchs and expand heat exchangers without overheating the tank and wasting electricity. Fits all TurboTank and G-TEC hot oil flushers.

Get Info Now

Heavy-Duty Flusher

Product From G-Tec

New from G-TECH is the Heavy Duty Flusher, a heated cooler line flusher that operates on 110 volt, 20 amp circuit and is available in 200+ volts. The G-TECH Heavy Duty:

  • Can work on heavy, medium and light duty cars and trucks.
Get Info Now