Baum Tools Unlimited Inc.

Baum Tools Unlimited Inc.

No image available.

The complete line of German automotive specialty tools and diagnostic scan tools. We carry European car repair manuals and put on training seminars for BMW#, Mercedes,VW and Audi.We also carry timing tool kits for Domestic and Asian cars.

  • PO Box 5867
  • 3922 Murdock Ave. Zip: 34231
  • Sarasota, FL 34277
  • USA
  • Phone: 941-927-1414
  • Toll Free: 800-848-6657
  • Fax: 941-927-1612
  • Website: http://www.baumtools.com

Want to know more about Baum Tools Unlimited Inc. Get Info Now

Expand for more details on this Company

Deutronic DBL 300 20-amp and DBL 700 45-amp computer-regulated power supplies

Product From Baum Tools Unlimited Inc.

Baum Tools introduces their Deutronic DBL 300 20-amp and DBL 700 45-amp computer-regulated power supplies for lead acid/AGM/VRLA batteries when flash programming a vehicle. A regulated battery charger/power supply is critical when flashing/programming late model vehicles in order to prevent any fluctuation, spiking or loss of voltage which will interrupt programming, cause damage to the controller, or lock it up. Features of these new "Intelligent Chargers" include:

Get Info Now

Mercedes Benz Coil Spring Compressor No. 924-0231

Product From Baum Tools Unlimited Inc.

The Mercedes Benz Coil Spring Compressor, No. 924-0231, from Baum Tools, compresses front and rear axle springs in the car on models with idler arm and some MacPherson type suspensions. Telescopic construction range is 120mm-325mm. Two sets of plates (two pieces each) are available for 95-120mm and 120-140mm springs. Works on most Mercedes models.

Get Info Now

MacPherson Strut Spring compressor No. 1117J

Product From Baum Tools Unlimited Inc.

MacPherson Strut Spring Compressor The new MacPherson Strut Spring compressor No. 1117J from Baum features reinforced mounts for compression jaws. The kit compresses all types of MacPherson style coil springs front and rear. Included are three sets of jaws (two each) for 110mm (4.33inch), 120mm(4.72inch) and 130mm(5.22 inch) springs found in most BMW, Volkswagen, Audi, Porsche, Volvo, Saab, Toyota, Lexus, Infinity, Honda, Acura, Chrysler, Scion, Jeep, Ford and GM models. Not for impact use.

Get Info Now

MacPherson Strut Spring compressor No. 1117J

Product From Baum Tools Unlimited Inc.

MacPherson Strut Spring Compressor The new MacPherson Strut Spring compressor No. 1117J from Baum features reinforced mounts for compression jaws. The kit compresses all types of MacPherson style coil springs front and rear. Included are three sets of jaws (two each) for 110mm (4.33inch), 120mm(4.72inch) and 130mm(5.22 inch) springs found in most BMW, Volkswagen, Audi, Porsche, Volvo, Saab, Toyota, Lexus, Infinity, Honda, Acura, Chrysler, Scion, Jeep, Ford and GM models. Not for impact use.

Get Info Now

B313000 BMW Sub Frame Traction Strut Bushing Replacement Kit

Product From Baum Tools Unlimited Inc.

Baum Tools recently introduced the B313000 BMW Sub Frame Traction Strut Bushing Replacement Kit. Hydraulically driven, this kit allows for quicker removal and installation of the bushing in the traction strut, without removing the strut, saving the ball joint from damage. The kit includes a hydraulic ram, pads and tubes. Although not included, a hydraulic foot pump is recommended to make the job a one-person function

Get Info Now

1117V MacPherson Strut Compression Vise Adapter

Product From Baum Tools Unlimited Inc.

Baum offers their #1117V MacPherson Strut Compression Vise Adapter for mounting struts in a vise, which can help reduce shock and strut assembly and disassembling times.

Get Info Now

4 Dipsticks for Mercedes Benz Engine

Product From Baum Tools Unlimited Inc.

Baum Tools has made available their line of 4 Mercedes Benz Engine and Transmission Dipsticks designed for use in the Lifetime No Service vehicles produced by Mercedes from 1988 to present. The company says that originally, these vehicles were not equipped with a fluid level indicator or dipsticks and with these vehicle's warranties expiring, dipsticks are needed to continue oil and fluid maintenance of the vehicles.

Get Info Now

BMW Outer and Center Ball Joint Kit E30 and E36

Product From Baum Tools Unlimited Inc.

Having A Ball Baum Tools offers their BMW Outer and Center Ball Joint Kits E30 and E36 for the removal and installation of the outer and center ball joints on the front wishbone in a press. The kit includes press adapter cups and pads. An On-Car Tool (#AS311440) for outer ball joints is also available.

Get Info Now

iScan/CS2000 upgrades

Product From Baum Tools Unlimited Inc.

Baum Tools recently unveiled new hardware and software for their iScan/CS2000 family of scan tools. The hardware consists of a CAN-compliant OBD-II multiplexer and the PS module for getting software updates via the internet. This new European software covers 1989-2005 Volvos and Porsche, 1986-2005 Mercedes, 1987-2005 BMW and 1988-2005 Volkswagen/Audi/SEAT/Skoda. System coverage includes drivetrain, transmission, chassis, body, climate control and information and communication systems. Capabilities of the iScan tool include:

Get Info Now

Rear Axle Hub R&R Kit

Product From Baum Tools Unlimited Inc.

Baum introduces their Rear Axle Hub R&R Kit for the BMW 5 Series. The tool is described as a screw-type puller for the removal of the hub and screw press installer in the rear axle hub on BMW's 5 Series E34 chassis.

Get Info Now