Welcome! This content is housed in a special section of our website designed for mobile tool distributors selling tools and equipment into the automotive aftermarket.
Articles written for mobile distributors are now only accessible with a unique login, to ensure this information stays exclusive to the mobile distributor community and isn't available to the public.
By registering to access this special section, you get full access to all of the content in VehicleServicePros.com magazine, along with exclusive online content that gives you an inside scoop on hot new products, exclusive stories, sales tips, technical information and more!
You will also need to be a qualified subscriber of VehicleServicePros.com to gain access. Subscribe to VehicleServicePros.com now or have your subscription ID ready.
It only takes a few minutes to register and verify your credentials. Register only once and simply use your login information when you return.
Login now to access exclusive content and learn more about how to make your mobile tool distribution business more efficient and profitable!
CEJN’s new MultiFLOW Air and Fluid Gun offers extreme air or fluid flow for cleaning, cooling and drying applications. This blowgun provides adjustable flow control, with nozzle adjustments from narrow jet to wide beam for specific cleaning needs. The ergonomic, non-slip grip helps prevent occupational injuries. An integrated steel nipple/adapter vents downstream pressure when disconnected, reducing hose whip and noise.
Features and benefits
CEJN’s MultiFLOW blowgun effectively cleans surfaces with air or water with unparalleled blowing force. Precise flow is achieved by adjustable flow settings. The nozzle adjusts from narrow jet to wide beam. The MultiFLOW meets and exceeds OSHA safety standards when dead-ended.
The MultiFLOW is to be used in compressed air lines up to 16 bar working pressure. Not aimed for high pressure or high temperature (above 80C) water cleaning.
When CEJN engineers set out to design an all-new, all-powerful blowgun, they first interviewed end-users to identify their job responsibilities. They learned that their new design would need to offer unique flow and flow control, as well as be equipped with nozzle adjustments that would make it a versatile tool for a variety of tasks.
By optimizing the flow geometry and designing ways of adapting the flow with a new jet nozzle and a flow adjustment, by using state of the art computerized design aids, the CEJN engineers and designers have created a high performing and versatile tool, solving many different applications for the end-users.
The MultiFLOW is made in Sweden using high quality POM, TPE and Aluminum. Internal seals are NBR.
- Air flow: 200-1200 L/min.
- Fluid flow: 5-25 L/min.
- Air sound level: 79-101 dBA.
- Max. working pressure: 232 PSI (16 bar).
- Min. burst pressure: 928 PSI (64 bar).
- Temperature range (16 bar/232 PSI): -4 degrees F to 140 degrees F.
- Temperature range (10 bar/145 PSI): -4 degrees F to 176 degrees F.
- Media: Air and non-explosive water based liquids.
CEJN’s latest blowgun development, the MultiFLOW Air & FluidGun, offers performance that is as superior as its styling. The premium blowgun offers extreme flow for cleaning, cooling and drying applications
Adjustable Jet Nozzle
Nozzle adjusts flow from a narrow jet for reaching hard-to-remove debris to a wide beam for cleaning wide-open surfaces.
Ergonomic, Rubber Non-Slip Grip
Molded rubber grip gives users a tight hold, resulting in increased operator comfort and control that guards against occupational injuries.
Variable Flow Control
Flow settings enable users to select precise flow needed for specific applications, resulting in managed power and energy savings. “Save” setting programs flow for repeat applications.
Integrated steel nipple/adapter vents downstream pressure when disconnecting, thereby reducing hose whip and noise that can cause operator injury. The safety-minded design delivers on CEJN’s promise to provide products that promote a safe working environment.
Storage and display
CEJN’s MultiFLOW Air & Fluid Gun is available in single packs (Nos. 11 210 0400, 11 210 0450) with an eyelet for hanging on display hooks. Customers can readily feel the solid grip of the handle, since it is not attached to the packaging.
An attractive, easy-to-assemble counter display puts eight MultiFLOW Air & Fluid Guns directly in front of customers, thereby increasing product awareness and counter sales
Colorful product posters will grab immediate customer attention. These effective marketing tools come in a variety of sizes and styles.
For more information
CEJN Industrial Corp.